Expert in replacing glass in an interior door. Repair of interior doors. How to glaze a blind door

Some interior doors are equipped with small glass that breaks easily. If it breaks, you will have to replace the glass in the door. However, before that you need to figure out how to properly replace it.

There are four types of glass that can be installed in doors.

Transparent

Most often, transparent glass is installed in door structures, which differ from other types at an affordable price. Among the disadvantages is fragility, since such material breaks easily. If the transparent glass is not severely cracked, it can be glued together with decorative film.

Matte

Sometimes apartments have doors with frosted glass inserts. Such an interior door not only decorates the interior of the room, but also protects it from the penetration of bright sunlight.

Also, the advantages of matte material include its high density, reliable sound insulation and moisture resistance.

With a pattern, corrugated and stained glass

The main feature of this type of glass inserts is their uneven surface and opacity. The advantages of corrugated coverings include a low level of sound permeability, thanks to which it is possible to protect the room from extraneous noise.

Tinted or mirrored

Mirrored and tinted glass inserts are more often used in shopping centers, but some manufacturers install them in interior doors. Tinting the glass surface impairs the transmission of light through the glass and makes it less transparent.

Material selection

Before replacing the door leaf, you need to familiarize yourself with how to choose a new glass material. The following important factors must be taken into account:

• Product type. You can place regular or decorative glass material in the opening. Some install plastic polycarbonate in the doors, which differs in density.
• Dimensions. Special attention pay attention to the dimensions of the canvas, since it must fit into the grooves.

How to remove cracked glass

To properly remove a cracked piece of glass, you need to figure out how to do it correctly.

What you will need

Select several materials that will be needed to complete the job.

Gloves

It's no secret that you can cut yourself with glass, and therefore it is recommended to think about protecting your hands in advance. Experts recommend protecting your skin from sharp glass corners with gloves. You should not use gardening gloves, as they are too thin. Instead, it is better to use products made of durable rubber.

Broom and dustpan

Broken glass leaves many small fragments that need to be disposed of. Some people remove them with a vacuum cleaner, but it is better not to do this. To collect the fragments, you need to use a regular broom and dustpan. You must sweep very carefully to collect all the debris from the floor.

Chisel

A chisel is the main tool that must be used when replacing door glass. With its help, they carefully pry up the glass sheet and pull it out of the door. It is recommended to use small chisels no more than 2-3 millimeters thick.

Several pieces of thick paper

It is no secret that glass is installed in special grooves on the doors. Sometimes the thickness of the glass is not enough, and it begins to hang tightly in the door groove. To solve this problem, you need to use a special sealing material. For sealing, durable paper or rubberized material is used.

Small hammer

To remove the door glass you will need a small hammer. This tool is used to remove the beads that hold the glass in the groove. You need to beat the glazing beads carefully so as not to accidentally break them with a hammer.

How to shoot

Having prepared the necessary tools, you can begin to remove the broken glass sheet. First you need to remove the door from its hinges and place it on flat surface. Then, using a hammer and chisel, the glazing beads responsible for holding the canvas are loosened and carefully removed. After this, all remaining glass is removed from the door.

Disposal

All unnecessary glass must be disposed of so that there are no shards left on the floor. To do this, sweep the floor several times with an ordinary broom. Collected garbage is placed in a trash can or other container. Glass shards must be removed from the apartment immediately to avoid accidental injury in the future.

Checking and replacing the rubber between the putty and the glass

Sealing rubber bands are often glued between the glass sheet and the fastening bead, which are used to increase the tightness of the joint. Experts recommend removing the old rubber band and replacing it with a new one. During removal, it is carefully pryed with a blade and disconnected.

What to replace

There are several materials used to replace broken glass.

Special decorative film

Sometimes people cover broken glass with special decorative strips. The film surface is opaque and poorly transmits light. The advantages of this material include the fact that it fits well into any interior.

Fiberboard sheet

Some people don't have new replacement glass and have to use other materials. Most often, fiberboard sheets are used instead of glass sheets. It is best to use such plywood sheets to close doors that lead to a utility room or basement.

Glass

The following types of glass can be installed in doorways.

Normal

A common type is ordinary glass, which is considered the most affordable. The advantages of such a glass sheet include the fact that it is easy to install.

Organic

Organic canvases are made from a special plastic material. Some experts do not recommend using organic materials, as they are subject to mechanical damage and corrosion. To protect the surface and extend the service life of the material, it is necessary to treat it with a protective mixture.

Stained glass

Stained glass is the least used, as it is the most expensive. The high cost of such products is due to their high strength. It is very difficult to break such glass sheets. Another advantage of glass is their attractive appearance.

Tempered

Tempered glass is a glass sheet that undergoes heat treatment during the manufacturing process to increase its strength. After heat treatment, the density of the products increases eight times.

Such glasses are most often used in the manufacture of partitions, tabletops and double-glazed windows.

How to insert

It is necessary to familiarize yourself in advance with how new glass is inserted.

Tools and materials

A number of materials and tools are identified that will be needed to carry out the work.

Sealant

A sealant is an elastic liquid that must be used to fill cracks, joints and depressions. When installing new glass, the surface of the glazing beads and the installed sheet is treated with sealant.

Small nails

Nails are considered the most common fastening material used to secure wood products. Small nails will be needed to attach the beads to the door.

Hammer

A hammer is a striking tool often used in the construction industry. When working with a door, it is recommended to use rubberized hammers rather than metal ones. When using them, it is difficult to damage the surface.

Glue

The glass is attached to the door using wooden beads. However, sometimes this is not enough and you have to use other additional means for fastening. Most often, superglue is used, which is applied to the edges of the glass sheet.

Rubber insert

To better secure the installed glass, use a rubberized insert. It is installed if the door grooves are too wide and the glass is loose.

Replacement scheme

Before installing new glass, the grooves on the doors are cleaned of any remaining adhesive and treated with sandpaper. Then a new sealant is poured into the cleaned recess, on top of which a rubber gasket is installed. After this, new glass is fixed in the opening, which is reinforced with glazing beads.

Features of work

There are certain features of the work that you need to become familiar with.

Tsar door

Drawstring structures are made of vertical posts, which are connected to each other by horizontal strips. These doors are rigid and durable.

The main feature of replacing glass in a side door is that you will have to remove the vertical posts.

Sliding design

Replacing glass on sliding structures is quite difficult. You will have to completely disassemble the door, because the fixing components of the door leaf are located in the sliding system. It is better to entrust such work to specialists who have repeatedly dismantled sliding doors.

Paneled

Panel type doors are made of several removable elements. To get to the glass installation site, you will have to remove most of the structural parts. Since they are connected to each other by grooves, they are easy to remove.

Panel

Panel structures are most often placed in interior doorways. In this case, the glass insert is attached using wooden beads. To remove the remains of broken glass, you will have to carefully pry up the glazing beads and remove them along with the fastening nails.

Do-it-yourself shaky glass repair

There are several tools you can use to repair loose inserts.

Sealant

To stop the installed canvas from wobbling, you can use a liquid sealant. It is poured into the grooves located between the door and the glass. After hardening, the glass tab will stop loosening.

Matches

Matches are considered the most accessible means to eliminate wobbly glass. Several matches are installed in the corners of the grooves so that the insert is better fixed and does not dangle.

Cork pieces

If there are large gaps between the glass insert and the door, you can use pieces of cork. They are installed in the gap and filled around the perimeter with liquid glue or sealant.

Reinstallation of glazing beads

Over time, the glazing beads no longer hold the inserts properly and you have to replace them with new ones. To do this, you need to get rid of the old planks and clean the grooves from any remaining glue.

How to hide a small crack

You can get rid of a small crack as follows:

• treat the crack with adhesives for gluing glass;
• use epoxy glue;
• cover the surface with decorative film;
• stick molding onto the crack.

How to glaze a blind door

To glaze a blind door, you will have to perform the following steps:

• cut a hole in the door for installing a glass insert;
• make mounting grooves and recesses for fastening glazing beads;
• select a canvas of suitable size and install it.

Prevention

To avoid replacing broken glass material in the future, you must use the door carefully. You cannot slam it when opening or closing it, as a strong impact may cause the canvas to become cracked.

Conclusion

Products with glass that quickly break are often used as interior doors. Before replacing a broken glass insert, you need to understand the main features of such work.

When replacing glass in an interior door, you should follow basic safety rules Interior doors are often decorated with inserts of various glasses. It looks very beautiful and stylish. But it happens that the glass breaks or is damaged in some other way, which leads to the need to replace it. Insert new material It’s quite possible to do it yourself, without resorting to the services of specialists. To do this, you need to have the necessary tools and follow safety precautions.

Options: how to replace glass in an interior door

When replacing broken glass, the question arises: what other materials can be used? Modern technologies Now they offer many options that you can use.

Before you buy new glass for an interior door, you should take measurements using a tape measure.

So, what can you replace a broken glass surface with:

1. Organic glass - its main advantage is that it is very difficult to break. True, you can scratch it. But even in this case, the material simply becomes cloudy. If desired, you can cover the plexiglass with decorative film, which will not only perform an aesthetic function, but also protect the material from scratches.
2. Decorative glass is one of the most expensive and stylish options. Its only drawback can be the problem of finding material with the desired pattern, otherwise all the glass will have to be replaced.
3. Simple glass - everything is simple here. The required dimensions are taken, an order is made to a glazier, and then installation occurs.
4. Plywood or fiberboard is a temporary, budget option. You can close the hole with a sheet of fiberboard folded in half, which is then covered with decorative film. But still, one cannot expect any special aesthetics or durability from such a replacement.

Using any of these options, you can safely replace the broken glass surface in an interior door.

Moreover, if desired, you can further darken the glass or glue any decorative inserts onto its surface.

Replacing glass in a door: preliminary stage

After you decide what material will be used to replace the glass, you can proceed directly to the process itself. There is nothing complicated here.

To make it more convenient to change the glass in the door, it can be removed from its hinges

However, before starting repairs, you should take some steps:

1. Remove the door and place it on any flat surface. As a rule, to do this, it is enough to lift it a little and twist it, freeing it from the loops.
2. Pull out the fragments if they still remain. This must be done very carefully and preferably wearing rubber gloves to avoid injury.
3. Remove the gasket that contained the old glass, and also clean the door of putty or sealant.
4. Clean the stock using sandpaper.
5. Take measurements. If the glass is of the correct or fairly simple shape, then this will not be difficult to do.
6. Order new glass from a glazier or cut it yourself.

You should know that the new glass should not be tightly inserted into the grooves. This means that when calculating dimensions it should be 15-20 mm smaller on all sides than the stock itself.

How to install glass in a door yourself

After all the necessary measurements have been made, the glass has been purchased or made to order, you can proceed directly to the installation itself.

You can cut an opening for glass in an interior door using an electric jigsaw

Installing a glass surface in interior door looks like this:

• Silicone sealant is applied around the entire perimeter of the hole;
• The new glass is inserted into the gasket and placed in its place;
• The sealant is applied again, only on the other side;
• The glazing beads are screwed in, which should then be secured with special decorative nails;
• Then you need to wait one or two hours until the sealant dries, after which you can hang the door in its place.

If the glass is very tight, do not use too much force to install it, otherwise you may damage it. In this case, it is better to trim the gasket slightly.

When inserting new glass, various sealants can only be used if permitted by the manufacturer. In other situations it is better to do without them.

Sometimes it happens that the type of door structure is a single piece made of glass and wood (for example, MDF) without the use of glazing beads or any other improvised means. What to do in this case? In this situation, in order to replace glass that has broken or been damaged in some other way, the doors can be completely disassembled.

To disassemble the interior door, you should use a screwdriver and other necessary tools

This is what the process looks like:

1. First, the door leaf is examined for the presence of special plugs. It is they who often hide various fastening elements (usually self-tapping screws).
2. Next, the structure can be removed from the door hinges and placed on the floor or other hard and flat surface.
3. Then all the plugs found must be carefully pulled out and the fasteners unscrewed. Moreover, it is not at all necessary to do this on both sides.
4. After the fasteners and plugs are removed, one of the door sides is removed, followed by the glass surface.
5. Next, new glass is inserted, and then the process of assembling the structure in reverse order.

In case of any problems with the seals, you can apply a little soap solution to the edges of the glass and thus facilitate its entry.

How to properly change glass in an interior door (video)

Replacing glass in an interior door is not as difficult as you might think. This entire process can be done on your own if you have the time and tools. The main thing is to accurately take the required dimensions, remembering to be careful when working. When choosing a new glass surface, you need to take into account its properties and the overall design of the room so that everything looks beautiful and harmonious.

An interior door, which does not perform a protective function, unlike the entrance door, belongs to the functional part of the room and is considered a fairly significant element of the attribute. Models with glass inserts add light to the room and give harmony to any interior. It happens that the glass breaks, and the owner is faced with the question of whether the damaged door element can be replaced and how to do it. This article contains detailed answers to these questions.

Professionals do not recommend replacing glass with your own hands. if you do not have specific skills in working with such materials. In the absence of knowledge of modern repair technology, the door deteriorates even more. This especially applies to stained glass, triplex and glass with photo printing, which are fragile and high in cost.

However, having armed yourself with the necessary tools and familiarized yourself with safety precautions, it is possible to eliminate the problem, but with a small nuance - it is unlikely that you will be able to find the same thing, since the manufacturer does not provide for the distribution of components for door models.

But don’t be upset, broken glass is replaced with other elements made from alternative materials. The main thing is to find out design features interior door and become familiar with the specifics of its production, since the fragile part requires careful handling.

If you manage to find something similar, cutting is best done by trade construction organizations, providing similar services after purchasing glass decor.

In general, replacing broken glass decor is not difficult.

Reasons for damage to glass inserts

In fact, a modern interior door is quite strong, but there are several factors that contribute to damage to the glass inserts:

• Poor quality material. Typically, the manufacturer uses fairly durable glass, which additionally serves as decorated inserts. But it happens that a material made not in accordance with the technological process becomes brittle and vulnerable, and becomes unusable at the slightest blow.
• Careless handling. Sometimes the door is subjected to a sharp slam, causing the glass to break. Most often this happens in families with small children. They can also deteriorate after contact with animals that like to close the door with their paws, causing it to slam.

Required Tools

Before installing new glass in the door structure, prepare tools in advance, which will be needed during the work process. These include:

• Hammer. Will be needed for driving nails and adjusting the position of the bead. A special furniture or rubberized hammer that does not damage the material is suitable for the job.
• 3 cm screws and a screwdriver.
• Ruler or tape measure.
• Fine-grained sandpaper.
• Pliers.
• Construction knife.
• Glass cutter.
• Chisel. May be needed when replacing glass.
• Gloves. Will help protect your hands from cuts.
• Scoop and broom. In order to collect broken old glass and remove debris left after installing a new one.

What to use?

Of course, interior doors with glass inserts look impressive and stylish, but due to the fragility of the material, situations often arise when the decorative element needs to be replaced. Owners prefer to replace the part with a similar one; they waste a lot of time searching for a suitable element, but this is not always possible.

If the search for a similar part is not successful, ordinary glass, frosted or any other, is replaced with one of the alternative materials produced according to modern technologies.

Fiberboard sheet

Laminated fiberboard folded in half is suitable as a temporary and budget option so that the smooth side is on the outside. Or a regular, non-laminated type of fiberboard, on the front surface of which an opaque decorative film is then applied. This method is considered the least aesthetically attractive and short-lived, therefore it most often serves as a temporary way to hide the missing glass element in the overall door structure.

Decorative film

If the glass is cracked but does not crumble, or if there are small chips, all parts of the structure are covered with decorative film. In this way, not only defects are hidden, but also integrity and harmony are achieved. appearance door design.

Stained glass insert

It is one of the most expensive materials used by manufacturers in the manufacture of interior doors. This glass adds style and uniqueness to the door, is quite durable and does not require additional modification. The only drawback is that it is difficult to find parts with similar decor, so you will have to change all the parts, which costs a significant amount.

Regular

Transparent material without additional decor at an affordable price is considered one of the most suitable for replacing a broken element. After taking measurements, the glass is ordered from a glazier, is inserted in place of the damaged element. Subject to availability necessary tools, glass cutters, for example, do the cutting and cutting themselves. Then the surface is decorated with a special film or any other suitable material.

Organic

In other words, it is a transparent plastic that resembles glass in appearance. It is also called monolithic polycarbonate, a durable, unbreakable material, the only drawback of which is the clouding of the structure. This is due to the appearance of scratches on the surface of the material. The application of decorative film will help protect the plexiglass or hide existing defects, which will additionally serve as a decoration for the door.

Tempered

Ordinary glass, made using a special technology, which has undergone heat treatment, giving the material not only increased strength, but also fire safety and sound insulation.

How to disassemble the structure?

Before replacing cracked or broken decor, you need to know how to disassemble the door. To do this, perform a number of actions:

1. Remove the door from its hinges so that the process of replacing the insert occurs as safely as possible. To do this, it is lifted and shaken in different directions.
2. Place it on any elevated, flat surface, such as a table or chairs pushed together.
3. It is better to cover the floor under the structure with old fabric to avoid damage in case of unforeseen situations.
4. Examine the method of fastening the glass to the leaf, as well as the design principle of the door itself.

If the decor is fixed with glazing beads, during repairs they are moved away with a chisel, knife or screwdriver, the broken insert is pulled out through the top, starting with large fragments, then removing small parts. Next, measurements are taken, a new element is selected, inserted and secured in the same way, but in reverse order.

To replace a damaged insert in interior door models where the glass is connected to the leaf without the use of a bead, disassemble the door in the following order:

1. Remove the door from its hinges and place it on a horizontal, solid surface.
2. Check the door structure for the presence of all kinds of plugs, behind which fasteners, such as self-tapping screws, are usually hidden.
3. Unscrew the plugs and unscrew the screws on one side of the door.
4. Pull out one of the door sides, free the cavity of the door structure from fragments. If the glass is cracked but remains intact, remove it.
5. Measure the damaged material, taking into account that the size of the new glass is 1.5-2 cm smaller than the stock.
6. Get rid of the old gasket, remaining adhesive, and sealant. Clean the blade with fine sandpaper.

What to use: necessary materials

Prepare materials in advance that will be useful in the process of replacing decorative glass, Having previously found out how the element is attached to the door:

• Glue. To securely attach the insert to the glass sheet, glue is often used, applying it to the edges of the glass sheet.
• Rubber seal. Useful for filling gaps between glass and doors that are too wide.
• Sealant. The elastic substance is useful for covering cracks, depressions and joints. The product is also used when installing new glass for application to the surface of the installed canvas and glazing beads.
• Small nails. They are used to fix the bead to the door leaf. It is considered the most reliable and common option.
• Beads and other fastening materials.
• Sealing paper. Useful to adjust the dimensions to the design of the canvas.

Attention

The list of tools and materials that will be needed for repair work may vary depending on the type of material, as well as the design features of the interior door.

How to install?

After the door is prepared, the old damaged glass is removed, and further replacement steps begin. Depending on the shape and door design, there are several options for replacing the insert.

1. Replacing decor rectangular shape In a standard veneer door this is easy to do. It is not necessary to disassemble the door for this; usually the glass panel in such models is inserted through the upper end. The prepared material, adjusted to size, is lubricated around the perimeter with silicone gel for reliable fixation, and lowered into the door leaf through the upper part.
2. If the insert was fastened with glazing beads, the quarters are removed using a chisel or a flat screwdriver, observing the order: first the side parts are dismantled, then the bottom. Next, measurements are taken from the broken part, a one-to-one analogue is prepared, put in place, secured with quarters in reverse order. If the glass does not crumble, apply a decorative film. Next, the glazing beads are secured with nails.
3. The non-standard type of canvas, in which the sashes are glued together, and not fastened with self-tapping screws hidden behind plugs on the side, as in the standard design, requires a slightly different approach. To replace the damaged element, the door is disassembled. How to do this is described above. When the damaged glass is removed, measurements are taken, an analogue is made and inserted into place.
4. In premium models, it is better to entrust the replacement of the insert to professionals, since the canvas has a collapsible design. To remove the broken glass, you will have to completely disassemble the structure and reassemble it after replacing the insert. The process is quite labor-intensive, requiring increased attention and caution. However, having understood the principle of assembly of a particular model, the replacement is carried out independently.
5. If the insert is made in a unique design style, has an oval shape or resembles a wave, the fragments are removed from the door cavity, the canvas is laid on cardboard spread on the floor, and traced along the outline with a marker. According to the measurements received, the workpiece is ordered from the workshop, and then a replacement is performed.
6. Doors in which glass is inserted instead of a panel are easy to disassemble. The vertical and transverse bars are connected according to the tongue-and-groove principle; to get to the glass you just need to open the lock and remove the insert. Then replace the damaged part and reassemble the door in the reverse order.
7. Broken glass in sliding door changes after the canvas is dismantled and the metal frame is removed. The method of inserting the glass element may differ; once you understand it, replace it according to the design features.
8. In addition to the standard interior door, today there are often drawer models in which the glass insert is also susceptible to damage. The door leaf in such models contains reinforcement bars, with the help of which the structure itself is securely fixed in the opening, which adds rigidity and strength to it. To change the insert, remove it, unscrew the plugs, unscrew the bolts from the inside of the hinges, and place it on the floor or a long table.

   Next, they begin to remove the remaining plugs along the edges of the canvas. Starting from the location of the fastening elements, moving from the bottom up, using a wooden block and a hammer, the drawer is separated from the canvas. Having disconnected the beam, remove the broken glass from the groove along with the rubber seal, measurements are taken, a new one is purchased, and a replacement is performed. The steps are performed in the reverse order, being careful and careful.

We offer you to watch a video on how to replace glass in an interior door:

Replacing a broken insert is a responsible and time-consuming task that requires compliance sequences of actions, which take into account the characteristics of the selected materials, as well as the door structure itself. Experts share their advice with those owners who decide to independently get rid of the unpresentable appearance of an interior door.

1. To remove broken glass, the glazing beads holding it in place do not need to be completely removed. It is enough to loosen the quarters with a screwdriver or a construction knife, bend them to the side, remove the fragments, and only then remove the fasteners.
2. Before replacement, the complexity of the work is assessed; some designs are unique and have non-standard dimensions, so they are assembled in production. These include, for example, triplexes.
3. If, after replacement, large gaps have formed between the canvas and the insert, pieces of cork are placed in the gap and filled with sealant or liquid glue.
4. A small crack that appears does not always require a complete replacement of the insert. It is enough to glue the area with special glue or “epoxy”, apply molding or decorative film.
5. Matches, which are installed in the corners of the grooves and also “sit” on silicone glue, will help fix the loose insert.
6. When removing glass, you should use rubberized gloves to avoid damaging your hands.
7. If it is not possible to remove the door, it is opened completely and the lower part is securely fixed. But this method is more suitable for standard veneer models, the inserts in which are fixed in quarters.
8. The renewed door leaf is left in a stationary position for several hours to allow the adhesives to harden and secure the internal structure.
9. To safely remove the broken material, the top beads are removed first.
10. Regardless of how strong the adhesion between the insert and the canvas seems at first glance, the fixation is completed by installing glazing beads. They are nailed with finishing decorative nails using a special carpenter's hammer.
11. Do not apply too much force when inserting new glass if it fits tightly into the groove. It is better to trim the gasket a little, otherwise the material may be damaged.
12. Before cutting, the glass is heated to room temperature, then washed with soapy water and wiped with a cotton cloth. Thus, the material becomes less brittle and does not crumble when cutting.

Replacing the insert with your own hands is a labor-intensive process, but quite feasible. The main thing is to understand the design of the interior door and the features of fastening individual elements. An important condition is the correctly selected alternative material, as well as compliance with the rules described above.

Most often, repairing interior doors comes down to replacing broken glass. There are cases when you can change it yourself, but sometimes you have to turn to specialists. In this article we will talk about when you can replace damaged glass yourself and how to do it correctly and quickly.

What types of glass are there for interior doors?

• lamination. During production, glass is poured into several layers, between which a special film is placed. The result is a durable material that does not crumble upon impact.
• liquid filling. In this case, a special liquid resin is poured onto the glass, which hardens under the influence of UV rays. It is quite durable, but costs less than that obtained by lamination.

What to do if glass breaks

This unpleasant situation can happen to anyone and, unfortunately, can lead to injury. First you need to remove the fragments from the floor so as not to damage your legs. And then you can remove the remaining glass in the following way:

1. We wear thick rubber gloves to avoid injuring your hands.
2. Using a screwdriver, loosen the glazing beads (the part that holds the glass).
3. We take out the fragments and wrap them in paper. We start with the large parts and then move on to the small ones.
4. We check the gasket tape for damage and replace it with a new one if necessary.

Advice! It is best to wear shoes with hard soles so as not to injure your feet from small fragments. And after removing the remaining glass, vacuum the floor again.

After the remaining glass is removed, we take measurements to purchase a new one. You can call a glazier or measure it yourself with a tape measure. If the opening has a complex geometric shape, transfer the dimensions to tracing paper.

Attention! The glass must fit freely into the door. To do this, you need to reduce its dimensions by 1-2 mm on each side.

How to replace glass yourself

Typically, glass is secured to the door frame using glazing beads (quarters). Then the replacement of the coating will be carried out as follows:

• Using a chisel or screwdriver, pull out the nails that hold the quarters in place. Then we grab it with pliers and pull it out.

Attention! First, pull out the side spatulas, then the bottom ones, and then the top ones.

• We remove the old gasket (if it is dried out or torn), as well as traces of glue and old sealant.
• We coat the bed for the glass sheet with silicone for windows or sealant.
• We insert the purchased glass into the canvas.

Advice! The glass should not fit tightly into the gasket; it is better to trim it.

• We install the spatulas, adjust them to size, and then secure them with decorative nails.

Advice! If you purchased ordinary glass and want to get a decorative texture, you can stick a special film. First you need to moisten the glass with soapy water and carefully stick the film, carefully removing all the air so that there are no bubbles.

How to change glass in monolithic doors

There are door models on which the glass is attached without the use of putties. In this case, you will have to disassemble the door according to the following scheme:

1. Remove the door from its hinges and place it on a flat surface.
2. Remove the plugs and unscrew the fasteners
3. Now you can carefully remove the side of the door and remove the damaged glass.
4. We install a new glass sheet and close it back with the side panel. If you have problems with the seal that prevents the glass sheet from rattling, moisten the edge of the glass with soapy water.

In conclusion, I would like to say that there are situations when replacing broken glass in an interior door yourself is impossible. For example, triplex glass needs to be replaced at the factory, just as broken material on PVC doors cannot be replaced.

Replacing broken glass: video

Replacing glass in a door with your own hands: photo

Interior doors with glass are pleasing to the eye. Thanks to them, the apartment is always filled with natural light. However, careless handling of such a door can lead to their fragile part cracking or breaking. The question arises: what to do? Of course, it is better to use the services of a professional craftsman who will qualitatively replace the glass sheet. However, if you think that you can cope with this task yourself, then try it after reading the article.

Replacement of glass in interior doors

Modern interior doors can have an original design and, as a result, a complex structure. In this case, you should not even think about replacing the broken glass sheet yourself. In some door structures, such an operation can only be carried out at a specialized enterprise.

How to insert rectangular glass

You can replace a broken rectangular glass panel in economy class interior doors yourself.

Typically, the glass panel in such door structures is installed through the top.

Repair steps include the following steps:

1. the fragments are carefully removed from the door;
2. the space in which the glass sheet needs to be installed is measured;
3. glass is ordered from the workshop in the appropriate sizes and thickness;
4. the finished glass is carefully inserted on top of the interior door;
5. for strengthening, silicone gel is used, which is applied around the perimeter of the glass;
6. When the gel dries, you need to remove the smudges.

When measuring the space in which a new glass panel will fit, you must measure the depth of the groove. This value must be added to the resulting dimensions. The depth of the groove is set by lowering a metal ruler into it.

If the glass sheet is attached using a bead, then measurements and installation are carried out in the same way. Only the “glazing bead” is first removed from the door structure. At the end of the repair work, it should be attached to its original place. Fastening is done with small nails.

Replacing the glass sheet in interior doors of this type is a rather labor-intensive process. As a rule, these doors have a collapsible design. And in order to pull out the damaged glass part, the door structure needs to be completely disassembled, replace the glass, and then reassemble it. Only a specialist can do this kind of work. It is usually produced in a special workshop.

If we are talking about repairing a door structure made of another material, for example, aluminum, then this too has its own difficulties. If the glass panel is inserted into an aluminum door the same way as into an economy class door, and is fastened like a “glazing bead” with an aluminum strip, then a replacement can be made. However, direct contact of the metal with the glass surface is undesirable. Therefore, during installation it is worth using a rubber gasket. If the glass panel is built into the door structure, then it can only be replaced by a special service company.

Replacement of non-standard glasses

Glass panels in interior door structures, made in a modern design style, may have different forms. It’s good if they have an oval shape, but it’s worse when the glass is made in the shape of a wave.

However, if the glass sheet is replaced through the top, then you can try to do this:

1. carefully remove the fragments;
2. collect them on a large sheet of paper, putting each in its place;
3. Use a marker to trace the outline of the glass;
4. Now you can order a glass sheet and insert it into the door structure.

Glass for interior door

Glass can be different in shape and manufacturing technology. These factors affect the price.

According to glass manufacturing technology, there are:

Prices for glass panels may be different.

• If we are talking about transparent glass, then its approximate price can be from 1000 rubles. for 1 sq. m.
• Matte can cost from 1600 rubles. for 1 sq. m.
• The price of a glass sheet with a matte sandblasted pattern starts from 2800 rubles. for 1 sq. m.
• Corrugated can be purchased at a price of 2500 rubles. for 1 sq. m.
• Stained glass can be purchased at a price of 8,000 rubles. for 1 sq. m.

Conclusion

Inserting a glass panel into an interior door is not as simple an operation as it seems at first glance. How to repair a simple door was described in the article. However, if you need to repair a complex door structure, or the broken glass has an elaborate shape, then in these cases it is better to call a specialist to your home, who will take appropriate measurements of the broken glass sheet, draw its drawing and install a new one.