Making a corner cabinet with your own hands, useful tips. Do-it-yourself corner wardrobe Do-it-yourself corner wardrobes

Drawing corner cabinet It’s difficult to do on your own, our article will tell you the solution.

You can assemble a corner cabinet with your own hands if you try.

From our article you will learn about all the features of cabinets designed for corners and openings.

Classmates

Peculiarities

A sliding wardrobe is the same wardrobe with hinged doors, but they are sliding. This saves up to 600 mm. space in front of him. By design they can be:

1. Built-in.

At the same time, the structural elements of such furniture are the ceiling, floor, as well as the walls of the room. The most economical in terms of using living space.

Labor-intensive to manufacture due to poor-quality construction work. The installation of fasteners causes defects on walls and ceilings. It is no longer possible to move it.

1. Case.

They differ from built-in cabinets in their mobility and installation time. Protect the wall decoration from contact with the internal contents and doors.

Less economical in its location in the room due to the gaps around the perimeter of the structure.

Depending on where they are located inside the home, they can be straight, angular or radial. In turn, corner structures can be created:

• with a beveled corner facade with a hinged door;
• with elements located at an angle relative to each other;
• like two independent pieces of furniture installed in the corner.
• Radial.

Only a real idea of ​​the technical advantages and functionality of the chosen design will give a tangible economic and aesthetic effect.

Creativity

This is one of the most difficult moments in creating furniture.

The issue of coordinating and budgeting an event with stakeholders is not idle. Not only the technical and economic indicators of the designed furniture, but also the social aspects of family life directly depend on its solution.

Preparing a preliminary design is not as labor-intensive as the main process of creating cabinet or built-in furniture. But it is the accuracy of the developed drawings and diagrams that will be the fundamental stone of the entire event.

Based on the preliminary design, it is necessary to begin carefully measuring the dimensions of the future location of the structure. You will need:

• roulette;
• plumb line, levels (not bad if laser);
• squares of various sizes;
• a flat wooden lath or metal profile for drywall.

First of all, we decide on the depth of the furniture. In practice, this size is taken to be 50 cm. Taking into account that 8-12 cm of them will be occupied by doors.

We carefully check the geometry of the location of the future furniture. We especially accurately measure:

• the size of the angle between the walls;
• curvilinearity and defects of walls;
• distance and parallelism of floor and ceiling;
• we take into account the minimum distance between them;
• horizontality, evenness, rigidity of the floor.

Please note: To eliminate unnecessary material costs and increase labor intensity, even without taking into account moral damages, it is necessary to once again check the accuracy of all measurements and the performance of all accessories.

Based on the existing preliminary design and the obtained dimensions, we prepare the project itself, taking into account:

1. Assembly sequences carried out on site.
2. Ensuring the greatest strength and reliability of the structure.
3. In my own way internal filling must be functional.
4. Ensure ease of installation and further use of built-in fittings.
5. Between the shelves, a distance of no more than 40 cm will be rational.
6. The height of the outerwear compartment is equal to the length of the clothing itself + 10 cm.
7. The practical height for attaching the hanger rod is at shoulder level.
8. The maximum height of the mezzanine shelf is 50cm.
9. The layout of the racks of the lower compartment is carried out depending on the position of the doors, for ease of use.
10. The same applies to drawers and baskets.

Material

The entire manufacturing process of the designed furniture will depend on what is chosen as the main material.

Here, both decorative and technological aspects of the aspect should be taken into account. The financial side of the issue is also important. What to choose:

1. Tree.

Traditional, and now even prestigious material. Its disadvantage is the possibility of warping when humidity changes. Alternatively, it may have a right to exist.

1. Drywall.

It is difficult to classify it as a furniture material, but it can still be done. Can only be used in combination with a metal frame, this way you can build. The doors will be made of a different material. It is more of a building structure than furniture.

These materials suitable for the manufacture of various cabinets include:

• Chipboard laminated or cached with decorative film;
• particle board of various densities and moisture resistance.

Children's furniture is made from grade E-1 boards.

• MDF (fine fraction) made of wood impregnated with a binder. It has found its greatest application in furniture making.
• Fiberboard (fibreboard), the same hardboard.

MDF boards and high-density laminated chipboard are the most suitable materials for furniture construction. The most responsible approach should be taken when calculating the width of the sashes.

Expert advice: The calculation is as follows: choose the largest door width. Determine the number of overlaps (1 less than the number of doors). Check the resulting width. If it doesn’t converge, we increase the number of doors. It is possible to change the internal layout.

1. You can't make too many of them. It will just be inconvenient.
2. You can't make it too wide - it will jam if it moves poorly. The most practical width is no more than 700 mm.
3. The overlap of doors must be done within 50-70 millimeters. If there is more, it will be inconvenient to use the internal shelves. If it is less, cracks will appear and you will need to use the sashes with caution.
4. The narrowest shelf should be wider than the door, otherwise it will be inaccessible.

The eyes are afraid

The practical implementation of the plan is the most interesting and exciting stage of all the work.

Each of its technological transitions demonstrates real results of work. Of course, we check the availability of the required tool:

• - with drills (for confirmation - 4.5 mm);
• screwdriver;
• circular saw with ruler;
• hand saw;
• corner clamp;
• roulette;
• stapler;
• regular and soft hammer;
• hex key for confirmat (furniture screw).

You will also need confirmations D×L = 6.4×50 mm, self-tapping screws, furniture corners for shelves and wooden dowels. Technological points:

1. Pre-cut and edged sheets of MDF or chipboard are marked for drilling holes for dowels and confirmats. The quality of assembly and general view products.
2. Clamping and drilling of mutually perpendicular parts is carried out using an angle clamp.
3. Drilling for confirmation is performed with a special confirmation drill. It is possible to drill with two drills of different diameters followed by countersinking.
4. The confirmations are tightened with a little force using a hex wrench.

Take note: It is convenient to assemble and fasten the cabinet to the wall using a U-shaped profile.

1. The choice of hangers for sashes is quite large, but the most practical among them are double-rail systems with a bottom support. The best is imported.
2. At the same time, one should keep in mind the possibility of using both a two-rail system with an upper support and a monorail version.

Note from experts: With the top support, it is possible for the sashes to fall out, making their adjustment difficult. With a monorail support, the design and installation are complicated. Care is required during operation.

A smartly designed and well executed built-in corner cabinet will make the most inaccessible and neglected space attractive and comfortable. Made with your own hands, it will be a source of pride for a long time.

How to make a corner wardrobe with your own hands, see the following video:

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Owners of small apartments often opt for cabinets installed in the corner, but before ordering such furniture, you need to have a drawing of a corner cabinet with dimensions on hand. After all, such structures must stand clearly on the wall, without deviating even a degree from the angle.

Corner cabinets are popular because they are quite ergonomic and allow you to save space in a small room. In addition, you can make a cabinet with your own hands using a drawing and detailed instructions. We will talk about this below.

Types of corner cabinets

In order to create a unique, functional design, furniture makers are experimenting with different shapes of cabinets. There are the most popular product configurations that should be studied before drawing up a drawing.

Table No. 1. Types of corner cabinets.

Illustration	Description
	Install such structures in corners small rooms. In this case, most often they are fixed directly to the wall - this shape allows you to properly smooth out the corners. The cabinet does not have full side walls, so its shelves are triangular.
	In this design, there is a wall on one side. Therefore, such a cabinet is considered more practical than the previous option. There is more free space inside.
	One of the most popular cabinet shapes. The design consists of two parts that connect at the corner. Such products are distinguished by their spaciousness.
	A special feature of the design is the presence of small but functional side walls. Due to this, additional modules can be placed inside the cabinet.

The most complex design for self-made is a triangular or trapezoidal cabinet - due to the fact that the product involves the presence of diagonal elements, which it is advisable to prepare in the presence of a professional.

Table No. 2. Types of corner cabinets according to installation method.

The designs differ from each other and in the type of doors. They can be hinged or sliding (compartment). In the first case, door leaves should not be made larger than 45 centimeters, otherwise the load on the hinges will be too heavy. In the second case, the doors can be quite massive, even more than 45 centimeters wide.

Prices for various corner cabinets

Corner cabinet

Material selection

Table No. 3. The most common materials for making cabinets.

View	Description
	This is the most environmentally friendly and expensive option for making furniture. Cabinets of this type are distinguished by their strength, durability, and at the same time they have an impressive weight. In addition, wood products have an unusual decorative look, they have a unique texture. It is recommended to choose the most durable wood options - oak, pine. It should be taken into account that such a material is deformed when exposed to high temperatures and humidity. In addition, it is exposed to pests.
	This material is a mixture of wood chips, various fibers and resin. The main advantage of the material is its affordable cost. Thanks to proper processing, MDF boards are durable and quite easy to process. In addition, they do not deform over time and have a very fine texture that does not stand out. Another obvious advantage is large size slabs
	This is a fairly strong material that is suitable for creating a cabinet frame. It is recommended to use only multi-layer plywood for such purposes. Like natural wood, this material can become deformed as a result of exposure to moisture.
	This material is often used to cover the frame of corner cabinets. It is lightweight, so installation will not seem difficult even for a beginner. In addition, some types of drywall have good resistance to humidity and temperature changes.

Prices for sheet plywood

Plywood sheets

Creating a Project

Before you start creating a drawing of the future structure, it is important to determine the place where it will be installed. At this stage, the following points should be taken into account: the number of shelves, drawers (if required). All this will allow us to develop the most detailed project.

It is important to observe the following nuances:

The diagram of a corner cabinet is drawn starting from the sides, because they are load-bearing and represent the appearance of whole boards. Then you should determine the height of the structure (usually from 2.2 meters).

Only then do you need to calculate the dimensions of the horizontal parts and the rods (if it is a wardrobe). Most often, large shelves are installed at the top of the cabinet, and a bar directly in the corner. The last stage Additional designations are added to the diagram where mirrors, lighting and other elements will be located.

Corner cabinet made of wood or MDF

To manufacture and assemble the cabinet you will need the following materials and tools:

Prices for popular models of jigsaws

Jigsaw

Video - How to assemble a corner wardrobe

Manufacturing of elements

Experts do not recommend cutting the material at home, because there is a high probability of getting crooked parts. It is advisable to contact a furniture shop with your cutting diagram, where specialized equipment is available.

At the same time, some craftsmen prefer to prepare parts for the cabinet themselves. In this case, you must have at least minimal experience in furniture making.

Step by step instructions.

Step 1. We cut out the parts of the walls, shelves, doors, drawers from the sheet. For such purposes, a circular saw or hacksaw is usually used. In this case, the second option is chosen very rarely, because damage may remain on the parts.

Step 2. It is necessary to process the edge of each part using polymer tape. It is applied to the edge and then fixed with an iron or hot air.

Step 3. The edge tape will need to be carefully smoothed using a cloth. After that, the remaining pieces of tape must be carefully cut off with a sharp blade.

Assembly of the structure

When all the parts and tools are ready, you can begin the process of assembling the structure.

Table No. 4. Assembling corner cabinet parts.

Illustration	Description
	You need to double check that the dimensions are correct. Therefore, before starting work, it is necessary to measure the walls.
	Next, you should install the legs on the bottom of the corner structure. They are fixed using self-tapping screws. Moreover, some models require the presence of a special base at a distance of 5 to 10 centimeters from the floor. In any case, the doors should not touch the floor, so installation of a support is required.
	The bottom with support must be placed in the corner. It must be stable, so it should be installed level. To do this, use a building level, which can be used to raise and lower the legs.
	Installation of the walls of the structure. They are secured with special ties or metal corners. In most cases, the first option is used, because such fasteners securely fix the parts and remain invisible.
	Fastening the subsequent lower segment of the structure. The legs are installed on it, and then it is fixed to the main body. To do this, it should be installed flush against the corner structure of the cabinet and leveled using a building level.
	Installing the sidewall. It is fixed at the junction of the lower parts. In this case, it is better to install it even before fixing the parts of the bottom.
	Connecting base elements using furniture ties. To do this, pre-drill holes.
	Installing the next side wall. At this stage it is necessary to install the top panel of the frame. This will give it more stability. Otherwise it may become loose.
	Sidewall fixation. Before securing it with furniture ties, you need to adjust the position according to the level.
	Other panels of the structure are installed in the same sequence. Their number will depend on the size of the cabinet. It is worth noting that it is much easier to assemble a cabinet with such small fragments.
	It is necessary to complete the assembly of the frame and then check its stability.

Installation of internal parts and doors

Table No. 5. Stages of installation of internal elements and fastening of doors.

Illustration	Description
	Installation of vertical elements and drawers. There are two ways to install shelves. In the first case, they are fixed using metal corners and euroscrews, but then they will be motionless. In the second case, you can install special holders on which shelves are installed on top. Drawers are mounted on guides, thanks to which they will slide out quickly and smoothly.
	Fastening the figured rod to the brackets. Install it on a shelf, which is then connected to the structure.
	Installing a shelf with a rod. It should be secured inside the corner structure. In the same way, you need to fix another shelf in another corner.
	This process consists of the following steps: 1. Parts of hinges (furniture) are attached to the walls of the frame. 2. After which another part of the hinges is installed on the doors themselves. 3. Then the hinges must be connected and secured with screws. After which you will need to adjust the position of the valves.
	Next, you need to eliminate the hole between the ceiling and the structure.
	The lower hole is covered with a chipboard panel or plinth of the appropriate size.
	Upon completion of work, it is necessary to check the stability of the cabinet again. If there are no flaws, then the design can be used.

Corner cabinet made of plasterboard

Before manufacturing and assembling a plasterboard cabinet, you must prepare the following materials and tools:

• sheets of drywall of the required size;
• metal profiles (racks and guides);
• accessories;
• measuring tape;
• scissors for metal and drywall;
• corners for fixing protrusions;
• self-tapping screws (for drywall);
• set of dowels;
• building level;
• screwdriver;
• putty;
• spatula;
• sandpaper;
• jigsaw (for cutting sheets);
• additional elements;
• hammer drill (for holes for screws);
• decorative plaster for finishing cladding.

If you have the above materials and tools, you can begin the process of manufacturing the structure.

Prices for popular models of screwdrivers

Screwdrivers

Video - How to make a built-in wardrobe from plasterboard

Frame installation

Step by step instructions.

Step 1. It is necessary to apply markings to the walls. At this stage, you should mark the installation locations of the structure to the wall using a pencil. For greater reliability, it is recommended to double-check these values ​​several times.

Step 2. You need to start marking metal profiles(guides) to the wall using self-tapping screws. At this stage, accuracy is especially important, so do not rush. Each element must be securely fixed, because the metal frame will carry the entire load. The screws are screwed in increments of no more than 100 millimeters, thanks to which the entire structure will be stable.

Step 3. It is necessary to install the rack profiles into the guides. To do this, use self-tapping screws or Euroscrews. Since this is a corner cabinet, the profiles will need to be given the necessary bend so that they fit into the structure without any obstacles. To do this, a notch is made on the beams with metal scissors. Such actions will allow you to quickly bend any profile.

Step 4. If you plan to install a large cabinet, then it is recommended to further strengthen the structure of the profiles. This can be done using the remaining profiles from which the jumpers are formed.

Step 5. Before starting the process of covering the structure with sheets of plasterboard, it is necessary to secure the corners. They are made from fragments of the remaining profiles, but if desired, they can be purchased at any hardware store.

Important point! Instead of metal profiles, wooden blocks are sometimes used to make the frame, but this is not the most best solution. After all, wood tends to shrink, which means the plasterboard structure can become deformed, causing cracks to appear in the plaster.

Sheathing of the structure

When the frame is completely ready, you can begin the sheathing process. This is quite easy to do if you follow the instructions.

Step by step instructions.

Step 1. It is necessary to fix the plasterboard sheet in the inside of the cabinet structure using self-tapping screws. After which, you should completely cover this part with sheets. It is important to remember that the pitch between the screws should be more than 150 millimeters. At the same time, they are deepened into the sheet by 1.5 millimeters so that the fasteners do not show through from the outside. You can read more about how to make fasteners for shelves with your own hands.

Step 2. Then you need to finish the outside of the structure with plasterboard. Such actions should be performed especially carefully to avoid mistakes.

Exterior finishing

When the plasterboard frame is ready, you should begin finishing its exterior using putty.

Prices for various types of putties

Putties

Step by step instructions.

Step 1. First, you need to apply a fairly thick layer of putty to hide the drywall seams and uneven areas. The structure must be left in this form for some time until the putty hardens.

Step 2. You will need to carefully sand the dry surface. This is done in order to remove sagging.

Step 3. The last layer is the final one, so it should be applied especially carefully.

Step 4. When the surface has dried, you need to go over it again with sandpaper in order to prepare for decoration.

Step 5. The last stage is decorating the cabinet. Finishing can be done using decorative plaster, various moisture-resistant paints.

Structural additions for corner cabinets

In order to create a complete look, open modules are installed in the side parts of the corner structure. They are a type of various shelves that are attached to the cabinet or installed end-to-end without fastenings. Thanks to this solution, you can make any large-sized product more interesting. In addition, such shelves are functional elements; they are often made of glass or plastic.

Quite often they are built into the closet led lamps. It is important to consider the total number of lighting fixtures in the room. Otherwise, this is a good addition, thanks to which the contents of the cabinet will be clearly visible, especially in five-wall structures.

Furniture making is always more difficult for beginners, so experienced craftsmen We recommend that you listen to the following recommendations:

It is also worth noting that the assembly of large-sized structures should not be done by one person. Therefore, it is better to take care of this in advance and involve another person in this matter.

Let's sum it up

Making furniture yourself is an opportunity to save money and develop a project for the “ideal” cabinet. In addition, in the process of work you can show your design abilities.

Corner is a structure installed between two walls.

With its help, you can benefit from free space and fill empty corners.

A distinctive feature of such furniture are sliding doors, which save space and add charm to the room.

Preparation

Shape and size

The shape of a corner wardrobe can be:

There are standard patterns and sizes for the manufacture of corner cabinets and non-standard ones. Standard schemes and the dimensions are considered:

As for non-standard products, it is advisable to install them in small, narrow and cramped spaces. When designing a drawing of a non-standard size corner wardrobe with your own hands, it is worth considering that:

• minimum depth the cabinet must be at least 35 cm. But the maximum permissible depth should not be more than 0.9 m;
• minimum width a non-standard piece of furniture should be at least 0.1 m. Then the doors will have a width of 45 cm. Narrower doors will be inconvenient to use and unstable;
• height There are no restrictions on non-standard products. Depending on the wishes and requirements of people, cabinets can be made as high as the ceiling. But the optimal comfortable height is 2.1 – 2.4 m.

Interior arrangement

When designing furniture, it is worth considering proper zoning of space. Namely, you will need:

• shelves for things. They are the main filling element. They can be made stationary or retractable, solid, ventilated, half or full depth;
• rails for shirts and other short items. Most often they are made of metal;
• hooks for bags and robes;
• shoe shelves. In the upper part of the mezzanine it is convenient to store shoes in boxes;
• drawers for underwear and socks;
• trousers. Their trousers will always be ironed and ready to put on;
• tie bar. It will make it convenient for you to select products. They will not wrinkle or lose shape;
• belt hooks;
• pull-out baskets for small things. All things will be visible in them. It will be convenient to store bracelets, glasses, watches in them. The inside of the basket can be divided into separate cells.

Scheme and drawing

After you have decided on the size, shape, materials and design of the cabinet, you should draw a diagram indicating all the internal compartments, drawers, and shelves.

Advice. If you own a PC, you can make a sketch using special program. With its help, both simple furniture elements and quite complex ones are created.

When creating a project for future furniture, it is important to consider:

• product dimensions;
• dimensions of the door, base and cabinet lid;
• materials and dimensions of the rear part;
• internal space - vertical and horizontal sections, drawers, shelves;
• the presence of mezzanines;
• arrangement of accessories.

Materials and tools

An important criterion in the manufacture of furniture is the choice of consumables. For the manufacture of the frame the following is used:

• natural wood. Wooden products are the most durable and environmentally friendly. Such furniture will delight owners with its natural beauty, interesting texture and texture. But its cost will be quite high;
• MDF. This material has good performance characteristics, durability and affordable cost. Distinctive features of MDF are its ease of use, environmental friendliness and safety, excellent decorative qualities;
• laminated chipboard. It is distinguished by practicality, durability, reasonable cost, moisture resistance and aesthetics. Modern manufacturers provide a wide color palette of laminated chipboard. Thanks to this, stylish and original furniture pieces are obtained.

Doors can be made from:

• wood;
• plastic;
• MDF or chipboard;
• tempered glass.

Important. The durability of structures directly depends on the driving mechanisms. That's why, special attention It is worth paying attention to the choice of fittings and guides. There is no need to skimp on these materials. It is recommended to purchase products only from well-established manufacturers.

To assemble the cabinet according to finished project You will need the following tools:

• hammer;
• screwdriver;
• drill;
• square;
• pencil.

Also, before installation, check the availability of:

• finished drawing;
• furniture board;
• guides and fittings;
• drawers, shelves, hangers, handles;
• dowels and screws;
• upper and lower false panels.

Manufacturing

How to make elements?

Having in hand a project for a corner cabinet with all the calculations, you can go to a company where they will cut out the materials for you.

If you decide to make all the details yourself, you need to:

1. From sheet material cut out all the elements of the product: walls, doors, shelves, drawer elements. You can make details using circular saw. It is also possible to cut with a hacksaw, but in this case chips may appear on the parts.
2. After this, we process the edges using PVC edge tape of a matching color. Trimming of cabinet elements can be done using an iron or a hair dryer.
3. We apply the trim with the adhesive surface to the part and iron it with an iron or heat it with a hairdryer.
4. Draw along the edge soft cloth, pressing it tightly against the product.
5. We cut off the remaining tape with a knife.

Assembly of the structure

The corner cabinet can be built-in or cabinet. The assembly process for different structures is slightly different.

To assemble a built-in product, there is no need to install the back wall and corner ends. The product assembly process will consist of the following steps:

1. If necessary, we process and level the walls in the room. We paint them or cover them with wallpaper.
2. We drill holes in the places of future fastenings.
3. We connect all the parts of the body.
4. We check the work done using a level.
5. Next we move on to the internal arrangement. We mark the location of the internal shelves of drawers and sectional partitions.
6. We install doors.

Frame of a cabinet product is assembled according to the following principle:

1. We make markings at the location where the piece of furniture will be installed.
2. We assemble a special device from a metal strip and two pieces of board connected at an angle. You will also need 2 quick-release clamps. Using these tools, it is convenient to connect workpieces at right angles.
3. We check the parts with a square and measure 7 cm from the top edge.
4. We make marks for drilling on the upper and lower parts and drill the parts.
5. Using a screwdriver, tighten the confirmat.
6. After fixing the sidewalls, we place the location of the shelves and make holes for them. We install the crossbar and screw all the shelves.
7. Next, we assemble the lower part of the furniture piece.
8. After assembling the cabinet, a sheet of fiberboard is attached to the back of the cabinet using furniture nails.
9. We install the door.

Door installation

The last step in assembling a corner cabinet with your own hands is installing the doors. They should be ordered separately from a company that deals with similar systems.

Sliding systems consist of the following elements:

• top guides;
• lower guides;
• the top of the door;
• bottom of the door;
• vertical stand for side parts;
• sealing rubber. It not only softens the opening and closing of the structure, but also prevents dust from entering;
• sets of upper and lower rollers;
• brackets for securing doors.
• vertical side profiles. They can be symmetrical or asymmetrical.
• door filler (mirror, wood, glass). Performs a purely decorative function, adding originality to the overall interior of the room.

Important. All door components must be covered with a protective film to prevent damage and scratches during delivery.

Door assembly instructions looks like this:

1. We place the door in a horizontal position so that it can be accessed from all sides.
2. In the upper part of the vertical stand we make two holes for fastening - the bottom hole will have a diameter of 6.5 mm, and the top hole will have a diameter of 10 mm.
3. At the bottom we attach a roller.
4. We insert a rubber seal into the upper part of the mirror and fix it with a profile. We lay the seal around the entire perimeter.
5. Next, install a vertical profile with a handle.
6. We join the upper profile to the cross member and tighten the screw with a hex key. The screw is not screwed in completely, since the upper rollers will be installed into it later. Only after this is the screw tightened until it stops.
7. Next, install the lower profile and tighten it with a hex wrench.
8. We put on the final vertical profile and tighten the screw with the upper roller.
9. We prepare everything for installing the lower roller, tighten the spring and carefully insert the roller into the drilled hole. We secure everything with a screw.
10. Fix the top guide. We do not screw the bottom guide.
11. We insert the lock for the door and set everything to the level. Only after checking that a gap of the same width is formed on the outside when the doors are closed, do we fix the lower guide with screws.

Instead of struggling with choosing furniture for a small apartment, it’s better to learn how to make a corner wardrobe with your own hands. After all, no matter how little space there is, the corners in the hallway, kitchen, and rooms remain empty. A hand-made cabinet will not only solve the problem of placing things, it will elegantly decorate the interior.

Design

There is no exemplary standard design that a corner wardrobe must comply with. It can be built-in (when you only need to install doors) or cabinet-mounted, have different sizes, different numbers of sides (triangular, trapezoidal, L- or U-shaped).

IN recent years The radius sliding wardrobe has become popular, which is a furniture structure devoid of sharp corners. Lovers of beauty will undoubtedly appreciate the curved doors that slide along the corresponding profiles. This layout allows you to save space and elegantly solve the storage problem. large quantity things.

In Fig.2. angular are diagram No. 1 (concave), No. 2 (convex), No. 5 (convex column of a massive furniture structure or a free-standing small wardrobe). All other options for radius sliding wardrobes can be obtained by combining the 6 initial types listed above.

Radius is beautiful and functional

The movement of the radius cabinet doors is smooth and almost silent. Similar characteristics are provided by the profile included in the sliding mechanism. Manufacturers offer it in steel or aluminum. We recommend choosing the second option for the following reasons:

• increased resistance to damage;
• minimizing noise when the door slides.

The cost of an aluminum profile is higher than a steel one. However, over the course of long-term use, you will appreciate your choice.

The wall thickness must be at least 0.12 cm. A thicker profile increases the reliability of fastening. High-quality components are produced by Komandor, Absolut, Raumplus, Aristo, and others. If the height of the radius cabinet is above 3 m, we recommend taking the Raumplus profile.

The doors of a radius sliding wardrobe can be with an upper sliding system or with a lower one. In the first case, the doors hang on rollers. Movement is carried out along the upper guide. The initial impression of the suspension system is excellent. However, the large load on the upper horizon causes its gradual sagging. The hanging system wears out quickly and, without regular maintenance, can unexpectedly lock the door at the most inopportune moment.

The second sliding system looks preferable for daily household use. The sash slides along the bottom guide, the door is attached and fixed along the top. The load is distributed evenly, the assembled structure will last longer.

Door elements

Assembling corner wardrobes with your own hands without a diagram showing the exact dimensions is impossible. Particular attention must be paid to the moving part of the structure - the doors. You cannot miss anything or take the wrong size; in such a case, the doors will not be able to be used normally.

Before assembling your closet, let's take a closer look at the door elements with lower system slip:

• Vertical side profiles can be symmetrical or asymmetrical. During operation they are used as handles. Symmetrical profiles look the same on both sides, while asymmetrical ones create a difference between the outer and outer sides.
• The asymmetrical rollers located at the top are designed to fix the sashes in the opening.
• The upper door frame is necessary for attaching wheels to it, as well as for subsequent fixation of the structure.
• The lower door frame is used to install the lower wheels and ensure proper sliding of the doors.
• The internal door filler (wood, glass, mirror) performs a decorative function and gives the entire interior a personality trait.
• The seal attached to the vertical side profiles, in addition to softening the impact of the door on the cabinet wall, protects the moving structure from dust.
• The door plug is used to secure the side vertical profiles.
• The assembly and adjustment screws allow you to change the sliding speed of the sashes.
• The stopper makes it possible to fix the door and avoid unintended opening of the doors.

Calculation of cabinet capacity

Any step by step instructions gives confidence in the work started, however, without a preliminary assessment of capacity, the result will be disappointing. Before drawing drawings and studying the assembly manual, decide what you will put on the shelves or hang. Then it will be difficult to move the functional sections; a beautiful-looking cabinet can become a source of bad mood.

• to arrange things according to the season, provide at least 2 sections for outerwear;
• when installing recessed lamps, the upper horizon of the cabinet is moved forward by 12-17 cm;
• not only convenient, but also functional when the depth of the shelves is at least 60 cm;
• shelf widths of more than 65 cm increase the risk of them sagging;
• the intershelf distance should be no more than 35 cm;
• accept a door width of 50 cm; smaller sizes may cause the guides to fall out;
• the number of functional compartments should be proportional to the number of sashes;
• When designing the dimensions of drawers, pay special attention to the location of the door frames; if they are too wide, it will be impossible to reach them;
• doors must be the same width;
• depends on the thickness of the chipboard appearance and cabinet strength;
• The material for the roof, side walls, and doors will be chipboard; the back wall can be made of fiberboard 3 mm thick.

The most practical option is to make a built-in radius wardrobe. This design will easily blend with the walls, hide possible defects, and require less consumption of materials and time. Housewives will appreciate the absence of gaps between the wall and the cabinet, where dust constantly accumulates

Assembling the closet

To install the designed cabinet you will definitely need:

• screwdriver;
• hammer;
• square;
• drill;
• pencil.

Before you begin assembling the structure, also make sure you have:

• drawings;
• furniture board 18 mm;
• doors and guides;
• “insides” of the cabinet (drawers, hangers, handles);
• door fittings, screws, dowels;
• side, bottom and top false panels.

Step-by-step assembly order:

1. Taking measurements and drawing “on the ground” where the cabinet will be installed (you will need a pencil and a level). Vertical posts are marked on the wall, profiles are marked on the floor and ceiling.
2. Determining the location for the shelves, drilling holes for the dowels, hammering them in with a hammer.
3. Fastening profiles for shelves to the wall, installing their lower holders.
4. Marking the mezzanine shelf and fastening it with self-tapping screws.
5. Adjusting the side wall to size and installing it.
6. Installation of internal “filling” (shelves, drawers, etc.).
7. Installation of pre-prepared false panels, attaching them to the floor, ceiling, side wall with a screwdriver.
8. Cutting and bending the upper and lower profiles (don’t forget to insert 1 stopper per door), attaching them with screws to the false panel.
9. Installation of the assembled door. The description of the actions is as follows:

• decorating with self-adhesive film (if necessary),
• installation of vertical profiles with screws,
• installing a door seal,
• securing the upper and lower door frames,
• attaching the bottom and top of the rollers,
• inserting the top guide, then the bottom,
• checking the correct sliding, adjusting it (if required) with a hexagon.

A sliding wardrobe is a very popular type of wardrobe, because it is not only spacious, but also takes up quite a bit of space. This piece of furniture is quite functional.

In this article we will tell you how to make a wardrobe with your own hands.

What is a coupe?

The concept of a coupe first appeared in France during the age of horse-drawn carriages. At that time, the city streets where the common people lived were so narrow that it was not always possible to open the cart door. This led to the appearance of carriages with sliding doors in the 17th century.

It is believed that the first carriage-coupe was invented by the French carriage master Jeanto. Whether this is actually true is unknown.

The crew of the coupe was considered to be flirtatious and frivolous, because this type of transport was usually used for secret meetings with ladies. Some linguistic experts believe that coupe comes from the word “couple,” which in French means extramarital affair.

Over time, compartment doors began to be used for train cars. As for the furniture industry, a wardrobe is any wardrobe with sliding doors.

Types of wardrobes

• Sliding wardrobes can be:
• Radial;
• Built-in;
• Hull;
• Straight;
• Corner.

Do-it-yourself built-in wardrobe technology

Instructions on how to make a wardrobe with your own hands:

• Selecting the material;
• We determine the degree, nature and technology of how the filling of the cabinet will be placed;
• We design the doors, choose the suspension option;
• Choosing a technology for fastening shelves;
• Preparing a niche;
• We make the necessary measurements and drawings;
• We purchase the necessary materials and accessories;
• We cut out the required blanks;
• We assemble the wardrobe and install interior lights if necessary.

What is a wardrobe made of?

Before you start designing a cabinet, you need to decide on the material, because it directly determines the technology by which this piece of furniture will be manufactured.

Made of wood and lining

Wood is classic material for making furniture. Today it is very prestigious to have furniture made from natural wood. But for a wardrobe - this is not best choice, since due to higher humidity the wood may begin to deform.

If you still want to make a wooden cabinet, then choose straight-grained wood that does not have strands, knots or cracks. It must be treated with special compounds.

The lining can be made of plastic or MDF. There is no need to prepare it in advance. But the frame of the cabinet doors will still have to be made of wood.

From plasterboard

It is possible to make a cabinet from gypsum plasterboard, but it is quite difficult. In fact, it will be a building structure, not a piece of furniture.

Made from laminate, MDF, fiberboard

These are the optimal materials for the manufacture of this type of furniture. You can make a wardrobe from these at home easily and simply. They have all the advantages of wood and none of its disadvantages.

There is just one caveat: it is advisable to choose fibreboard with a density higher than average.

What is the filling made of?

The filling determines how the cabinet space will be distributed, where the shelves and drawers will be located. Experts advise following the following recommendations:

• Wet place on the side;
• The necessary small things are at eye level;
• Dry – on top;
• The most expensive thing is to distribute it into boxes.

The purpose of planning the filling is to achieve the smallest width of the shelves, which will be required when calculating the doors. The distribution of the interior space of the cabinet must be approached responsibly.

The contents of the closet significantly influences how comfortable, convenient it will be and how many years it will last.

Wardrobe doors

Doors are the most complex part of the cabinet and require the most responsible approach. It is necessary to decide how many sashes will be needed and what width, the design of the suspension and stoppers.

Pay attention!

The fewer doors there are in a closet, the more convenient it is to use. But this increases the risk of warping and stalling. The maximum width allowed for sashes is 60-70 cm.

In addition, the doors should not be wider than the narrowest shelf, otherwise it will be impossible to get to it. It is also desirable that the sashes overlap by at least 5-7 cm.

You don’t have to buy such a necessary thing as a wardrobe; you can make it yourself. It’s easy to find drawings of a wide variety of wardrobe models on the Internet. A hand-made cabinet will be a source of pride for you.

Photo of a do-it-yourself wardrobe

Pay attention!

Pay attention!